Samsung SLC3060ND код ошибки
13.02.2020 181 0.0 0
  • Code: 11-2T11, 11-2T21
  • Description:Paper mismatch Tray 1 Load [A4]
    Paper mismatch Tray 2 Load [A4] [Plain]
  • Causes:Paper in tray is not matched to the machine paper setting.
  • Remedy:1) Check and change the paper setting of the corresponding tray properly.
  • Code: 11-2T31, 11-2T61
  • Description:Paper mismatch Tray 3 Load [A4]
    Paper mismatch MPT Load [A4]
  • Causes:Paper in tray is not matched to the machine paper setting.
  • Remedy:1) Check and change the paper setting of the corresponding tray properly.
  • Code: A1-1210
  • Description:Error: #A1-1210 / Motor Failure: #A1-1210. Turn off then on. Call for service if the problem persists
  • Causes:The fuser motor does not operate. / The fuser motor is operating but is recognized as stop status.
  • Remedy:1) Turn the machine off then on. If the error persists, turn the machine off again.
    2) Remove the rear and right cover.
    3) Check if there are any obstacles or paper around the fuser unit.
    4) Check if the connection between main board and fuser motor are correct.
    5) If the connection is OK, replace the fuser motor.
    6) If there is a driver test for this component, please try it first. If the problem persists, replace the main board.
  • Code: A1-3621, A1-3622, A1-4111
  • Description:Error: #A1-3621 / Motor Failure: #A1-3621. Turn off then on. Call for service if the problem persists
    Error: #A1-3622 / Motor Failure: #A1-3622. Turn off then on. Call for service if the problem persists
    Error: #A1-4111 / Motor Failure: #A1-4111. Turn off then on. Call for service if the problem persists
  • Causes:The motor for OPC/Deve/ITB does not operate normally.
  • Remedy:1) Turn the machine off then on. If the error persists, turn the machine off again.
    2) Remove the right cover.
    3) Check if the connection between main board and 2 motors in the main drive unit are correct.
    4) If the connection is OK, replace the motor in the main drive unit.
    5) If there is a driver test for this component, please try it first. If the problem persists, replace the main board.
  • Code: A1-4112, A1-4310

  • Description:Error: #A1-4112 / Motor Failure: #A1-4112. Turn off then on. Call for service if the problem persists
    Error: #A1-4310 / Motor Failure: #A1-4310. Turn off then on. Call for service if the problem persists
  • Causes:The motor for OPC/Deve/ITB does not operate normally.
  • Remedy:1) Turn the machine off then on. If the error persists, turn the machine off again.
    2) Remove the right cover.
    3) Check if the connection between main board and 2 motors in the main drive unit are correct.
    4) If the connection is OK, replace the motor in the main drive unit.
    5) If there is a driver test for this component, please try it first. If the problem persists, replace the main board.
  • Code: A2-1210, A2-2110
  • Description:Error: #A2-1210 / Fan Failure: #A2-1210. Turn off then on. Call for service if the problem persists
    Error: #A2-2110 / Fan Failure: #A2-2110. Turn off then on. Call for service if the problem persists
  • Causes:The SMPS fan or Fuser fan does not operate normally.
  • Remedy:1) Turn the machine off then on. If the error persists, turn the machine off again.
    2) Remove the right cover.
    3) Check if the connection between main board and the related fan is correct.
    4) If the connection is OK, replace the defective fan.
  • Code: A3-3211, A3-3212
  • Description:Error: #A3-3211 / Sensor Failure: #A3-3211. Turn off then on. Call for service if the problem persists
    Error: #A3-3212 / Sensor Failure: #A3-3212. Turn off then on. Call for service if the problem persists
  • Causes:The inner temperature sensor is defective.
  • Remedy:1) Turn the machine off then on. If the error persists, turn the machine off again.
    2) Enter the tech mode. Check the temperature sensor output.
    3) If the sensor is defective, replace it.
    4) If the temperature sensor is OK, replace the main board.
  • Code: A3-3311, A3-3312
  • Description:Error: #A3-3311 / Sensor Failure: #A3-3311. Turn off then on. Call for service if the problem persists
    Error: #A3-3312 / Sensor Failure: #A3-3312. Turn off then on. Call for service if the problem persists
  • Causes:The outer temperature sensor is defective.
  • Remedy:1) Turn the machine off then on. If the error persists, turn the machine off again.
    2) Enter the tech mode. Check the temperature sensor output.
    3) If the sensor is defective, replace it.
    4) If the temperature sensor is OK, replace the main board.

Теги:Samsung SLC3060ND error code, Samsung SLC3060ND код ошибки


Читайте также:
Комментарии
comments powered by HyperComments