Samsung SF6600 код ошибки
12.02.2020 5 0.0 0
  • Code: 01
  • Display:DOCUMENT JAM
  • Description:The loaded document has jammed in the feeder.
  • Remedy:Clear the document jam.
  • Code: 02
  • Display:DOOR OPEN
  • Description:The top cover is not securely latched.
  • Remedy:Press down on the cover until it clicks in place.
  • Code: 03
  • Display:FUSER ERROR
  • Description:There occurs a problem in the fuser unit.
  • Remedy:Unplug the power code and plug it back in. If the problem still persists, please call for service.
  • Code: 04
  • Display:JAM/NO CARTRIDGE
  • Description:Recording paper has jammed inside the unit, or the toner cartridge is not installed.
  • Remedy:Clear the jam, or install the cartridge
  • Code: 05

  • Display:LINE ERROR
  • Description:Your unit cannot connect with the remote machine, or has lost contact because of a problem on the phone line.
  • Remedy:Try again. If failure persists, wait an hour or so for the line to clear, then try again. Or, turn the ECM mode on.
  • Code: 06
  • Display:LOAD DOCUMENT
  • Description:You have attempted to set up a sending operation with no document loaded.
  • Remedy:Load a document and try again.
  • Code: 07
  • Display:LSU ERROR
  • Description:There occurs a problem in the LSU (Laser Scanning Unit).
  • Remedy:Unplug the power code and plug it back in. If the problem still persists, please call for service.
  • Code: 08
  • Display:MEMORY FULL
  • Description:The memory is full.
  • Remedy:Either delete unnecessary documents, or retransmit after more memory becomes available, or split the transmission into more than one operation.

Теги:Samsung SF6600 error code, Samsung SF6600 код ошибки

Читайте также: