Samsung Msys 830 код ошибки
20.12.2019 19 0.0 0
  • Code: 01
  • Display:RETRY REDIAL?
  • Description:The machine is waiting for the programmed interval to automatically redial.
  • Remedy:You can press START to immediately redial, or STOP to cancel the redial operation.
  • Code: 02
  • Display:COMM. ERROR
  • Description:A problem with the facsimile communications has occurred.
  • Remedy:Try again.
  • Code: 03
  • Display:DOCUMENT JAM
  • Description:Loaded document has Jammed in the feeder When Document Jam aeeurred at ADF module
  • Remedy:Clear the document Jam.
  • Code: 04
  • Display:DOOR OPEN
  • Description:The side cover is not securely latched.
  • Remedy:Clear the cover until it clicks in place.
  • Code: 05

  • Description:You have tried to select a group location where only a single location number can be used, such as when adding locations for a multi-dial operation.
  • Remedy:Try again, check location for group.
  • Code: 06
  • Display:LINE ERROR
  • Description:Your unit cannot connect with the remote machine, or has lost contact because of a problem on the phone line. When the machine has a problem in cause of fax data reception step
  • Remedy:Try again. If failure persists, wait an hour or so for the line to clear then try again.
  • Code: 07
  • Description:You have attempted to set up a sending operation with no document loaded.
  • Remedy:Load a document and try again.
  • Code: 08
  • Display:MEMORY FULL
  • Description:The memory has become full.
  • Remedy:Either delete unnecessary documents, or retransmit after more memory becomes available, or split the transmission into more than one operation.

Теги:Samsung Msys 830 error code, Samsung Msys 830 код ошибки

Читайте также: