Samsung ML920 код ошибки
20.12.2019 26 0
- Code: 01
- Display:RETRY REDIAL?
- Description:The machine is waiting for the programmed interval to automatically redial.
- Remedy:You can press START to immediately redial, or STOP to cancel the redial operation.
- Code: 02
- Display:COMM. ERROR
- Description:A problem with the facsimile communications has occurred.
- Remedy:Try again.
- Code: 03
- Display:DOCUMENT JAM
- Description:Loaded document has Jammed in the feeder When Document Jam aeeurred at ADF module
- Remedy:Clear the document Jam.
- Code: 04
- Display:DOOR OPEN
- Description:The side cover is not securely latched.
- Remedy:Clear the cover until it clicks in place.
- Display:GROUP NOT AVAILABLE
- Description:You have tried to select a group location where only a single location number can be used, such as when adding locations for a multi-dial operation.
- Remedy:Try again, check location for group.
- Code: 06
- Display:LINE ERROR
- Description:Your unit cannot connect with the remote machine, or has lost contact because of a problem on the phone line. When the machine has a problem in cause of fax data reception step
- Remedy:Try again. If failure persists, wait an hour or so for the line to clear then try again.
- Code: 07
- Display:LOAD DOCUMENT
- Description:You have attempted to set up a sending operation with no document loaded.
- Remedy:Load a document and try again.
- Code: 08
- Display:MEMORY FULL
- Description:The memory has become full.
- Remedy:Either delete unnecessary documents, or retransmit after more memory becomes available, or split the transmission into more than one operation.