Brother ADS3600W код ошибки
02.12.2019 9 0.0 0
  • Code: 8100
  • Description:A document longer than the specified length was set and scanned.
  • Remedy:<User Check> • Set the document length within the standard.
    1 Dirt on the eject roller Clean the eject roller. 2 Feed belt failure Replace the feed belt. 3 Feed motor failure Replace the feed motor. 4 Main PCB failure Replace the main PCB ASSY.
  • Code: A200
  • Description:The first side document scanning position sensor detected that the document length was 90 cm or more while scanning a document.
  • Remedy:<User Check> • Set the document length within the standard. • Remove the jammed document.
    1 First side document scanning position actuator caught in sections of the machine Reattach the first side document scanning position actuator. 2 First side document scanning position sensor failure Replace the first side document scanning position sensor PCB. 3 Main PCB failure Replace the main PCB ASSY.
  • Code: A300
  • Description:The document scanning position sensor has not detected the document passing even after the document has been fed for the specified time.
  • Remedy:<User Check> • Set a document within the specified size in the ADF correctly. • Remove the jammed document.
    1 Document scanning position actuator coming off Reattach the document scanning position actuator. 2 Connection failure of the first side document scanning position sensor harness Reconnect the first side document scanning position sensor harness. 3 Document scanning position sensor failure Replace the document scanning position sensor PCB ASSY. 4 Main PCB failure Replace the main PCB ASSY.
  • Code: A400
  • Description:The front cover sensor detected an open front cover.
  • Remedy:<User Check> • Close the front cover correctly.
    1 Connection failure of the front cover sensor harness Reconnect the front cover sensor harness. 2 Front cover sensor attachment failure Reattach the front cover sensor. 3 Front cover sensor failure Replace the front cover sensor. 4 Main PCB failure Replace the main PCB ASSY.
  • Code: A700

  • Description:Color parameter in the ROM does not match the first side or second side CIS.
  • Remedy:1 Old firmware Install the latest version of the firmware. 2 First side or second side CIS unit failure Replace the first side or second side CIS unit. 3 Main PCB failure Replace the main PCB ASSY.
  • Code: A900
  • Description:A scanning error occurred while scanning the image.
  • Remedy:1 Program malfunction Install the latest version of the firmware. 2 First side or second side CIS unit failure Replace the first side or second side CIS unit. 3 Main PCB failure Replace the main PCB ASSY.
  • Code: AB00
  • Description:The multi feeding sensor detected multiple documents.
  • Remedy:<User Check> • Check that the thickness of the document is within the standard. • Check that the number of documents set in each tray is within the standard. • Moisten a soft cloth with cleaning solution. Gently and evenly wipe the pick up roller and reverse roller perpendicular to the direction of the rotation with the cloth to clean it. Note: Do not use any solution except the one packaged in the accessory (ethanol or detergent on the market). Failure to keep this instruction may cause the roller deterioration or machine break down.
    1 Incorrect multi feeding sensor threshold setting Reset the multi feeding sensor threshold. 2 Multi feeding sensor (Sent/ Receive) failure Replace the multi feeding sensor (Sent/ Receive). 3 Main PCB failure Replace the main PCB ASSY.
  • Code: B000
  • Description:Detected that the first side CIS flat cable or second side CIS flat cable was not inserted correctly.
  • Remedy:1 Connection failure of the first side or second side CIS flat cable Reconnect the first side or second side CIS flat cable. 2 First side or second side CIS unit flat cable failure Replace the first side or second side CIS unit flat cable. 3 First side or second side CIS unit failure Replace the first side or second side CIS unit. 4 Main PCB failure Replace the main PCB ASSY.

Теги:Brother ADS3600W код ошибки, Brother ADS3600W error code

Читайте также:
Комментарии
Добавлять комментарии могут только зарегистрированные пользователи.
[ Регистрация | Вход ]